Shaw 4000 Specification
Shaw 4000 Carpet Seam Sealer
Any variance from these procedures will become the responsibility of the installer and not the manufacturer. For specific questions regarding Shaw 4000 not covered within this document go to the web site or contact the phone number below. For installation assistance please contact Shaw Technical Support at 1.800.471.7429.
Shaw requires the use of seam sealer on all carpet products with the exception of carpet tile products. Shaw 4000 is a non-flammable seam sealer recommended for sealing cut edges of carpet to prevent raveling.
Features and Benefits
- Applies easily with applicator tip
- CRI Green Label Plus certified and SCAQMD compliant
Weight |
Pallet Qty. |
Pallet Weight |
12 qts./22 lbs. |
45 Cases |
1040 lbs. |
Laboratory Tests |
Results |
Polymer type |
Latex Polymer |
Percent solids |
55-57% |
VOC’s (Rule #1168 of California’s SCAQMD) |
<6 g/L |
Rollability |
Easy |
Density |
8-9 lbs. |
Consistency |
Paste |
Color |
White, dries clear |
Shelf life |
1 year when stored in original packaging at 70° F (21°C) |
Storage conditions |
65°F to 95°F (18°C to 35°C) |
Flash point (ASTM D56) |
None |
Protect from traffic |
30 minutes |
Protect containers from freezing in transit and storage. Provide for heated storage on site and deliver all materials at least 24 hours before work begins.
Environmental
- CRI Green Label Plus Certified #60112
- Meets the requirements of California South Coast Air Quality Management District Rule 1168
- Meets the requirements of California Department of Public Health Section 01350
LEED IEQ Credit Information (Version 2009 and V4)
Credit Requirement |
Status |
Comment |
Meet General Emissions Evaluation Criteria |
Complies |
CRI Green Label Plus (GLP) # 60112 |
VOC’s (Rule #1168 of California SCAQMD amended October 6, 2017) |
Complies |
VOC Content < 50g/L |
1-Year Warranty
This product is covered by a 1-year limited warranty. For information on this limited warranty, please ask your authorized Shaw retailer or contact us at the number below.
Approximate Product Coverages
Application |
Coverage |
1/8” bead |
550-600 linear feet |
Coverages shown are for estimating purposes only. Actual jobsite coverages may vary according to applicator tip size and application.
Application
- Prepare carpet according to Shaw’s Installation Guidelines.
- Apply a bead of seam sealer along the carpet primary backing using the applicator tip provided with the bottle.
- When direct gluing carpet apply seam sealer to only one side of the carpet. When stretching in carpet apply seam sealer to both sides of the carpet.
- Complete the seam by butting both sections of the carpet together while the seam sealer is still wet (within 5-10 minutes). When stretching in carpet, allow both seam sealed edges to dry to a clear state before hot melting the seam. Hot melting will reactivate the seam sealer to bond both edges of carpeting together.
Clean up
To remove smears of seam sealer from the carpet surface within 10 minutes use a clean cloth wet with soapy water. Do not apply soapy water directly on carpet. Clean with mineral spirits once dried. Use caution with mineral spirits, which may be harmful to some materials.