Lokseam MOISTURE IMPERVIOUS SEAM SEALER
Any variance from these procedures will become the responsibility of the installer and manufacturer. For specific question regarding Shaw LokSeam not covered within this document please contact Technical Support at 800.471.7429. Shaw LokSeam offers an alternative to use of transition strips. This two part clear polyester polyurethane polymer-fortified, nonflammable seam sealer recommended for sealing / bonding vinyl to vinyl and vinyl to carpet applications.
FEATURES AND BENEFITS
- Applies easily with an injection applicator / cartridge
- Tensile Strength 3200 psi ASTM D4595
- Seams will not separate under 25,000 cycles Caster Testing
- Provides excellent water and chemical resistance
- Passes British Spill / 10,000 impact tests when applied properly
| Laboratory Tests |
Results |
| Polymer type |
Polyester Polyurethane |
| Color |
Clear |
| Shelf life |
1 Year |
| Storage conditions |
Stored in original packaging at 60°- 86°F (20°+/- 5°C) |
| Protect from traffic |
See Product Specific Installation Instructions |
Although the seam sealer is freeze/thaw stable, protect containers from freezing in transit and storage. Provide for heated storage on site and deliver all materials at least 24 hours before work begins.
Packaging
LokSeam Kit: Dispensing Applicator, (2) 50ml Seam Sealer Cartridges each foil packaged with 5 mixers (applicator tips) 1.3 lb.
Replacement Kit: (3) 50ml Seam Sealer Cartridges each foil packaged with 5 mixers (applicator tips) 1 lb.
Replacement Applicator: .5 lb.
7 -YEAR WARRANTY
This product is covered by a 7-year limited warranty. For information on this limited warranty, please ask your authorized Shaw retailer or 1.800.257.7429.
APPROXIMATE PRODUCT COVERAGES
Coverages shown are for estimating purposes only when bonding 2.5mm and 5mm thick products. Actual jobsite coverages may vary according to application.
| Product Application |
Coverage |
| 2.5 mm |
up to 100 lf per cartridge |
| 5 mm |
up to 50 lf per cartridge |
*sealed properly after use
APPLICATION
- Prepare carpet / vinyl according to Shaw Industries Installation Guidelines.
- Apply a bead of seam sealer along the carpet primary backing or vinyl edge using the applicator tip provided with the bottle.
- Complete the seam by butting both sections of the flooring together while the seam sealer is still wet (within 5 to 10 minutes).
CLEAN UP
Clean with alcohol wipes, odorless mineral spirits or isopropyl alcohol 70% before the adhesive has cured.