Resilient WALL BASE and ACCESSORIES MAINTENANCE

INITIAL MAINTENANCE

Allow the adhesive to dry thoroughly before completing initial maintenance. Wipe off any excess amounts of adhesive that may have come through the seams with a damp cloth. If needed, use a solvent such as Isopropyl Alcohol or Odorless Mineral Spirits to remove adhesive that has dried. Never scrape dried adhesive, scraping may cause damage to the wall base. Initial and normal maintenance procedures are as follows:

ROUTINE / YEARLY MAINTENANCE

• Wall Base and Accessories are maintained by hand.
• Wash with a wet cloth or wet mop use a neutral pH cleaner.
• Rinse with clear water.
• You may wipe with dry cloth or let air dry
• Clean as needed